Network Tester Tracker RJ45 RJ11 BNC POE PING, 8- Remotes

Description

My name is Kip and I stand behind all the products I sell with a
100% Satisfaction Guarantee!
NF8601W Multi-purpose Network Tester with 8-Remote ends and tracer
We know that there are a lot of choices for network testers which makes it extremely difficult to determine which one to invest your money on. Let us help - buy this one
.
• Mis-Wires• Shorts• Opens• POE voltage • Ping • Wire Mapping • Cable Length verification • Port Flash • Cable Tracing • Crosstalk detection •
9 Major Functions
Cable Length Verification
Mapping
The 8-Remote ends #1 to #8 produce an audible tone when connected to the main unit.
The NF8601W really shines in its ability to map and test wiring at the same time. When a remote is found, it will show if the wire or cable is wired correctly, cross-wired, open or shorted.
If you need to follow a wire, or figure out which port on a switch it is connected to, the Scan Mode is just what your looking for. The Probe offers both a visual and adjustable audible tone when you've located the wire connected to the main unit.
NF-8601 Transmitter specs:
Display
2.8 in. LCD 320x240 mm, with back light
Cable test types
STP/UTP 5E,6E network, telephone,      coaxial
Wire mapping distance
2000m, 6600 feet
Tracing distance Max. (RJ45,RJ11,BNC)
1000m, 3300 feet
Length distance Max. (RJ45,RJ11,BNC)
2000m, 6600 feet
Min. distance for calibration
10m, 33 feet
Accuracy for RJ45
5% (after calibration)
Accuracy for RJ11
3% (after calibration)
Accuracy for BNC
5% (after calibration)
Ports
RJ45(Ping/POE), RJ11, Coxial, BNC
Cable Map display
LCD (#1-#8, Ground)
Battery type
3.7V lithium battery 1800mAh
Dimensions (LxWxD)
183x58x35mm, 11x3.5x2in.
NF-8601 Remote
Ports
RJ45, RJ11, BNC
Dimensions (LxWxD)
106x32x30mm, 6.5x2.0x1.75in.
NF-8601 Receiver
Cable hunting
RJ45, RJ11, BNC
LED Indicators
Power,scan,NCV(voltage),scan & flashlight
Dimensions (LxWxD)
183x58x35mm, 7x2.5x1in.
Battery type
7V lithium battery 1800mAh
10 Major Function
Measure length of network cable, coaxial cable, telephone cable and USB cables up to 2000m, no remote unit connected. Also determines distance to break point.
Ping Results
POE Voltage
Obtain IP address automatically or manually set IP address. Displays Ping statistics and speed. Uses PoE/Ping port.
POE testing is performed using the side port marked PoE/Ping.
Scanning
8 Remote Ends
The Main unit will display the ID# of the remote attached.
Crossover
Mis-wire other
Specifications